Trowel-Ease TM
Material Safety Data Sheet
Revision Date: January/01/2017
|
Product Name: Trowel-Ease
Product Use:
Lubrication for troweled coating
Manufacturer's Name:
APCO
Industries Ltd.
Information Telephone:
416-267-6301
|
1.Hazardous Ingredients
|
Ethylene Glycol n-Buthyl Ether: Case No. 111.76
LD50 470 mg-kg Rat:
LC50: N/A
WHMIS Classification:
Class D, Div. 2 - Toxic Material
|
2.
Physical Data
|
Appearance and Odour -Clear liquid with an ether-like
odour
Odour Threshold - Not Applicable
Vapour Pressure - 0.88 MMHG @
25°C
Vapour Density - 4.10
Evaporation Rate - Not
available
Boiling Point - . 340°F
Freezing Point -N/A
pH -
N/A
Specific Gravity - 0.867 @ 25/25
Solubility in Water
-Infinite
|
3a.
Fire and Explosion Data
|
Flammability - Non Flammable
Means of Extinction - Alcohol,
Foam, CO2, Dry Chemical
Flash Point - 150°F., TTC
Upper Flammable
Limit - 10.6% vol.
Lower Flammable Limit - 1.1% vol.
Auto ignition
Temperature - Not Applicable
Hazardous Combustion Products - Fumes,
smoke and carbon monoxide
|
3b. Explosion Data
|
Sensitivity to impact - Not Known
Sensitivity to Static Discharge
Ground Electrical Machinery
|
4.
Reactivity Data
|
Chemical Stability - Stable under Normal Conditions
Incompatible
Substances -Strong Oxidizing Agents
Conditions to Avoid - Extreme
Heat
Hazardous Decomposition Products - Not Applicable
Hazardous
Polymerization - Will not occur
|
5.
Toxological Properties
|
Effects of Acute Exposure - Narcais
Effects of Chronic Exposure
- Not available
Exposure Limits - Not available
Route of
Entry:
Inhalation - OSHA guide and ACGIH TLV in 50 p.p.m.
Eye
Contact - Slight pain, moderate irritation, and corneal injury
Skin
Contact - Essentially non-irritating
Ingestion - Harmful if swallowed.
Material is corrosive
Sensitization - Moderate
toxicity
Carcinogenicity Data - The ingredients of this product are not
listed as carcinogens
|
6.
Precautions for Safe Handling and Use
|
Hand Protection - Wear rubber chemical gloves
Eye Protection
- Chemical workers goggles
Respiratory Protection - Proper environmental
controls
Body Protection -Wear protective clothing to avoid personal
contact
Ventilation Controls - Local Ventilation
Handling and
Storing - Keep unused containers closed. Store between 5°-40°C
Waste
Disposal Method -Burn in accordance with local laws
|
7. First Aid Measures
|
Inhalation - Remove affected victim to fresh air,
administer oxygen if breathing is difficult.
Get medical
attention
|
Eye Contact - Immediately Flush eyes with large amounts of water for at least 15
minutes.
Get immediate medical attention
|
Skin Contact - Wash immediately with mild soap and warm water
|
Ingestion - Moderately toxic.
If conscious give two (2) glasses of water and
induce
vomiting. Get prompt medical attention
|
|
|
The
information provided in this (material safety data sheet) has been
obtained from sources believed to be reliable.
G.T.H. Industries Ltd. provides no warranties, express or implied
and assumes no responsibility for the accuracy or completeness of the data
contained herein.
|
